Milton's Tips

Milton says, "You've just got to try Kustom
Kolor paints for your next model. You will be in for an amazing
treat!"
|
Kustom
Color Model Paint
Until now Kustom Kolor has only been available in Wal-Mart.
By the end of December, 2007, this paint line will be available ONLY in
authorized hobby stores around the country. PARMA HOBBY is one of
those stores!
From House of Kolor®
The makers of House of Kolor® are excited to introduce Kustom
Kolor®, a brand new line of paints for modeling enthusiasts.
Finally, there is a model paint line from a proven custom paint company.
If you haven’t tried this paint, you’re in for an amazing treat!
House of Kolor® custom finishes can give your models that show-stopping
House of Kolor® look with Kustom Kolor®. Some of the most popular
colors in the House of Kolor® line have been recreated, in a paint
that’s safe for your plastic, metal, and wood models.
A Superior Solvent-based Paint Line
This paint allows for direct finishing on polystyrene,
polycarbonate, Lexan and many other surfaces. This is a superior
solvent-based paint line for a large range of users from beginners to
the professional hobbyist.
Tremendous Flexibility, Adhesion, Durability and Nitro Fuel
Resistant!
In addition, this paint offers tremendous flexibility,
adhesion and durability for the extreme demands and harsh environments
of radio control. It is Nitro Fuel resistant and can be used on
both sides of Lexan bodies.
Our Frequently Asked Questions About Kustom Kolor Paints
Here are some of our frequently asked questions about Kustom
Color paints:
- Why do we strongly recommend basecoats? – Several reasons,
here are just a few: 1.) It gives your model an even color to
start, allowing for the best and brightest looking colors. 2.)
Due to the semi-translucent nature of the paint base, coatings allow
for fewer coats to get coverage. 3.) Some custom paints are
designed to enhance the colors that are painted with them. Kandy
colors enhance the base that they are painted over; Kameleon® or color
shift pigments are enhanced by being painted over darker colors.
- What is the reduction for airbrushing? – This is a matter
of personal preference, but a good benchmark is to start at 20%
reducer. We have found that some colors need more or less
reduction.
- What kind of paint is Kustom Kolor®? – It is a type of
enamel paint.
- Is Kustom Kolor paint House of Kolor® paint in a smaller
container? – NO, House of Kolor® uses a different technology in
the binder/carrier, most of which would require activators to make
them work properly. However, most of the pigments are the same
pigments that you would find in the House of Kolor® paint line, and
Kustom Kolor® is made by the same company, in the same facility, that
makes House of Kolor®.
- Why not just use House of Kolor® Paint? – The House of
Kolor® paint system was designed for professional painters; the paint
requires very specific conditions, equipment and mixing to make it
work properly. It was designed to be sprayed as a complete
system in a spray booth. House of Kolor® is not designed to be
used on the type of plastics that models are made from.
|